durosite ? led emergency shower safe luminaire mechanical information fixture weight: 5.4 kg (11.9 lb) cable entry options: all cable entries are drilled and tapped see ordering option electrical specifications operating voltage: 230/240 vac input current: 110ma input wattage : 24w battery : 3.6v 4ah nimh battery life : 4 years battery duration : >3 hours operating temp: 0c to +50c (-20 c versions available) harmonics: en 61000-3-2: 2006 thd: <20% @ 230 vac surge protection: en-61000-4-5 1 kv line to line 2 kv line to ground power factor: > 0.9 materials housing: copper free aluminium cast finish: light grey epoxy powder coated (ral7001) lens: high impact resistant polycarbonate mounting brackets: 306 stainless steel stanchion brackets: copper free lm6 aluminium cast configuration: flush or 30 angle photometric information dominant wavelength 530.0 nm all values typical unless otherwise state dimensions in mm [inches] certifications ? ce - compliant en 55015:2006 / en 61547:2009 / en 60598-2-22:1999 ? iec 60068 salt spray testing - severity 1 ? ik10 to en 50102 ? ip66 to en 60529 ? gost r approved features & benefits ? 5 year full performance warranty ? 360 visibility ? instant on/off operation ? mercury free, lead free ? led indicator for fixture battery monitoring ? resistant to shock and vibration ? l70 rated for >100,000 hours @ 45c ambient ? factory sealed application: the dialight durosite ? led shower safe emergency bulkhead luminaire has a rugged design to ensure long life and high reliability when used to identify emergency showers on large industrial sites. specially designed optics and 360 viewing angle make this a high visibility light unit for this application. this self-contained maintained emergency luminaire offers a minimum of 3 hours of illumination equal to 10% of the standard output. it is ideally suited for explosive environments, mills, chemical plants and other hazardous environments where emergency shower areas are required. dialight offers flush, angle, stanchion mounting bracket and adjustable mounting options for use with the durosite bulkhead as well as a recessed housing. www.dialight.com ordering codes for standard model 2 m20 entries on 1 side ordering code: example: we-0g4h-flgd product family - optic led colour voltage led qty - bracket finish glazing we 0 =no optics g = green 4 = 230/240 vac 18 leds a = angle bracket lg = light grey d = dome lens f = flush bracket n = no bracket
www.dialight.com durosite ? led emergency shower safe luminaire bulkhead with no bracket option recommended for use with below accessories bulkhead with flush mount bracket option bulkhead with 30 degree angle bracket option 70mm (2.76) 226mm (8.9) m6 x 12mm taptite 204mm (8.03) ? 8mm (0.31) 168mm (6.61) 35mm (1.38) 226mm (8.9) ? 8mm (0.31) part number description wpbrktssadj adjustable bracket 306 stainless steel adjustable bracket 6x ? 8.5mm (0.35) mounting holes recommended to be used with wea2 or wea4 versions. wpstmblg0022 bsp threaded straight stanchion mounting bracket copper free lm6 material with epdm gasket applied and 2 m6 grub screws stanchion mount bracket comes with bsp 1 1/2 threaded base that fits 1 1/2 pole. other threading options available, moq applies. recommended to be used with wea5 versions. wpstmblg0024 npt threaded straight stanchion mounting bracket copper free lm6 material with epdm gasket applied and 2 m6 grub screws stanchion mount bracket comes with npt 1 1/2 threaded base that fits 1 1/2 pole. other threading options available, moq applies. recommended to be used with wea5 versions. wpstmblg2522 bsp threaded 25 degree stanchion mounting bracket copper free lm6 material with epdm gasket applied and 2 m6 grub screws stanchion mount bracket comes with bsp 1 1/2 threaded base that fits 1 1/2 pole. other threading options available, moq applies. recommended to be used with wea5 versions. wpstmblg2524 npt threaded 25 degree stanchion mounting bracket copper free lm6 material with epdm gasket applied and 2 m6 grub screws stanchion mount bracket comes with npt 1 1/2 threaded base that fits 1 1/2 pole. other threading options available, moq applies. recommended to be used with wea5 versions. WPRECESSWH recessed housing welded aluminium construction with white powder coating (ral 9010) (refer to certificate schedule for ambient operating conditions) accessories recessed housing adjustable bracket 259,4mm (10.02) 116,2mm (4.5) 256 ctrs (10.079) 37,5mm (1.5) 180mm (7.1) 75mm (3.0) ? 8.5mm (.3) ? 36mm (1.4) 75mm (3.0) 30 60 90 ? 6 (.236) ? 36,5 (1.437) 240 ctrs (9.449) 101 (3.976) 49,8 (1.961) 282 (11.102) 186,6 (7.346) 235 (9.252) 183,6 (7.228) 340,6 (13.409) 106,99 (4.212) 337,6 (13.291) dialight reserves the right to make changes at any time in order to supply the best product possible. the most current version of this document will always be available at: www.dialight.com/assets/brochures_and_catalogs/illumination/mdexsswseuhzc001.pdf mounting options mdexsswseuhzc001_a
|
